› SOME REMARKS ON THE INDENTATION SIZE EFFECT AT SMALL INDENTATION DEPTHS - Petr Haušild, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering
14:15-14:45 (30min)
› Comparaison entre trois expressions de la déformation représentative de Tabor en indentation conique - Xavier Hernot, Laboratoire de Génie Civil et Génie Mécanique
14:45-15:05 (20min)
› On the interest of the Berkovich and conical tip shape to identify interactions between dislocations in nickel single crystals from the residual topography - Alexandre Bourceret, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174)
15:05-15:25 (20min)
› Study by nanoindentation of the influence of the manufacturing process on the mechanical properties of Copper-Clad Aluminum wires - Sophie Eve
15:25-15:45 (20min)
› Crystal plasticity finite element analysis of nanoindentation process in pure iron and ferritic/martensitic steel at elevated temperatures - Tymofii Khvan, Département d'Aérospatiale et de Mécanique [Liège], Centre dÉtude de lÉnergie Nucléaire
15:45-16:05 (20min)
› Identification of the Hollomon's law parameters and the representative strain based on a spherical indentation analytical model - Alaa ALBAYDA, Laboratoire de Génie Civil et Génie Mécanique
16:30-16:50 (20min)
› Characterization of CoCrFeNiMn High Entropy Alloys Prepared by Various Techniques - Jaroslav Čech, Czech Technical University in Prague
16:50-17:10 (20min)
› CHARACTERIZATION OF METALLURGICAL EVOLUTIONS OF PURE ALUMINUM ALONG THERMAL RAMPS USING HIGH-TEMPERATURE SCANNING INDENTATION - Gabrielle Tiphéne, Laboratoire de Tribologie et Dynamique des Systèmes, Ecole des Mines de Saint-Etienne, LGF UMR5307 CNRS, Saint-Etienne, France - Guillaume KERMOUCHE, Ecole des Mines de Saint-Etienne, LGF UMR5307 CNRS, Saint-Etienne, France
17:10-17:30 (20min)
› EXPERIMENTAL STUDY OF DEFORMATION BEHAVIOR OF SINGLE CRYSTAL COPPER (001) DURING SCRATCH PROCESS - Larissa Pinheiro de Brito, CEMEF
17:30-17:50 (20min)
› Study of flange-seal rough interface for high-sealing applications - Yvan Marthouret, Ecole Nationale Supérieure des Mines de St Etienne, Institut des Sciences et technologies pour une Economie Circulaire des énergies bas carbone - Guillaume Kermouche, Laboratoire Georges Friedel - Tony Zaouter, Institut des Sciences et technologies pour une Economie Circulaire des énergies bas carbone
17:50-18:10 (20min)
› An attempt to assess recovery/recrystallization kinetics in tungsten at high temperature using statistical nanoindentation analysis - Guillaume Kermouche, Laboratoire Georges Friedel
19:00-19:45 (45min)
› Argiope/Hardness: A Python package for indentation simulation - Ludovic Charleux, Laboratoire SYstèmes et Matériaux pour la MEcatronique - Vincent Keryvin, Univ. Bretagne Sud, UMR CNRS 6027, IRDL, F-56321 Lorient, France
19:00-19:45 (45min)
› Caractérisation mécanique par indentation in-situ d'aciers de conduites forcées d'EDF Hydro - Gérard Mauvoisin, Laboratoire de Génie Civil et Génie Mécanique
19:00-19:45 (45min)
› ELECTROLESS NICKEL-BORON COATINGS AS CANDIDATES FOR HARD CHROMIUM REPLACEMENT - Alex Montagne, Mechanics surfaces and materials processing
19:00-19:45 (45min)
› Essai nano-DCB - Eric Le Bourhis, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI
19:00-19:45 (45min)
› HIGH STRAIN RATE AND SMALL-SCALE MECHANICAL PROPERTIES OF METALS - Bénédicte Adogou, Mines Saint-Etienne, LGF
19:00-19:45 (45min)
› On the characterization of the wood finishing by a UV-cured topcoat using indentation and scratch tests - Sylvain GIljean, Laboratoire de Physique et Mécanique Textiles (LPMT) - Marie-José PAC, Laboratoire de Physique et Mécanique Textiles (LPMT)
19:00-19:45 (45min)
› Pile-up during nanoindentation of microelectronic AlSiCu layer: AFM characterizations of residual indents - Rosine COQ GERMANICUS, NORMANDIE UNIV, ENSICAEN, UNICAEN, CNRS, CRISMAT
19:00-19:45 (45min)
› Suivi des propriétés physico-mécaniques par macro-indentation au cours de la géopolymérisation - Hugo Thuilliez, Univ Rennes, Laboratoire de Génie Civil et Génie Mécanique - Gérard Mauvoisin, INSA Rennes, Laboratoire de Génie Civil et Génie Mécanique
19:00-19:45 (45min)
› The problem of contact mechanics at nanoscale, or how to use an AFM tip for quantitative measurements - Malgorzata Kopycinska-Müller, Fraunhofer Institute for Ceramic Technologies and Systems
08:30-09:00 (30min)
› A combined nanoindentation / EBSD study of microstructural internal lengths effects on plastic heterogeneities in single-phase ferritic steels - Layal CHAMMA, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux, ArcelorMittal Maizières Research SA
09:00-09:20 (20min)
› A method to determine elastic constants in a beta metastable titanium alloy based on spherical nanoindentation - Jean-Sébastien Lecomte, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux
09:20-09:40 (20min)
› Development of a new method to measure surface mechanical properties by microshear - Gaylord GUILLONNEAU, Laboratoire de Tribologie et Dynamique des Systèmes, UMR5513
09:40-10:00 (20min)
› Identification des propriétés mécaniques et électriques d'oxyde thermique de cuivre par nanoindentation-résistive - Morgan RUSINOWICZ, Science et Ingénierie des Matériaux et Procédés
10:00-10:20 (20min)
› Improvements to the calibration in machine compliance and indenter tip defect for microindentation - Didier Chicot, Laboratoire de Génie Civil et Géo-Environnement (LGCgE) - ULR 4515
10:50-11:10 (20min)
› Linking elastic properties of rocks to their microstructure by using nanoindentation and SEM-EDS - Camille Chateau, Laboratoire Navier
11:10-11:30 (20min)
› Mesures microstructurelles corrélées, applications à l'apprentissage automatique - michel fajfrowski, Bruker Nano Surface
11:30-11:50 (20min)
› TRANSVERSE COMPRESSION TESTS OF FIBRES: MODELS, NUMERICAL SIMULATIONS AND EXPERIMENTAL STUDY - Gilles Arnold, Laboratoire de Physique et Mécanique Textiles
11:50-12:10 (20min)
› DEVELOPMENT OF A MATERIAL PROPERTIES DATA MANAGEMENT WORKFLOW: FROM INDENTATION EXPERIMENTS TO NUMERICAL MODELLING - David MERCIER, Ansys, Inc.
12:10-12:30 (20min)
› Nanoindentation at High Strain Rates: Challenges and Recent Improvements - Benoit Merle, Department of Materials Science and Engineering, Institute I, Friedrich-Alexander-University Erlangen-Nürnberg, Germany
14:00-14:30 (30min)
› HIGH TEMPERATURE SCANNING INDENTATION: HOW TO PROBE PHYSICAL CHANGES IN THIN FILM METALLIC GLASSES? - Solène Comby-Dassonneville, Matériaux, ingénierie et science [Villeurbanne]
14:30-14:50 (20min)
› INVESTIGATION PAR NANOINDENTATION DES CHANGEMENTS MICROSTRUCTURAUX DU PEKK DANS UN COMPOSITE PEKK/CF SUITE AU FLUAGE EN TEMPERATURE - Olga Smerdova, Institut Pprime
14:50-15:10 (20min)
› Temperature and strain-rate dependent plasticity of fused silica - Remo Widmer, EMPA Mechanics of Materials and Nanostructures
15:10-15:30 (20min)
› Recent innovation in Scanning Electron Microscope (SEM) in-situ extreme mechanics in extreme environments - Nicholas Randall, Alemnis AG
15:30-15:50 (20min)
› Direct observation of the displacement field and microcracking in a glass by means of X-ray tomography during in situ Vickers indentation experiment - Lacondemine Tanguy, Institut de Physique de Rennes
16:30-16:50 (20min)
› Instrumented indenter to study the fracture properties of bulk ceramics (UO2 and ZrO2) at the microstructure scale: direct indentation and micro-bending tests - Ronan Henry, Groupe de Physique des Matériaux
16:50-17:10 (20min)
› Micromechanical properties assessment of slag and calcined clay-based cementitious materials using statistical nanoindentation - Imane Bekrine, Institut de Recherche en Génie Civil et Mécanique
17:10-17:30 (20min)
› Proposal of simple method for estimation of the indenter shape by low load indentations: a study on fused silica and sapphire - Jiri Nohava, Anton Paar TriTec SA - Jaroslav Čech, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Department of Materials - Petr Haušild, Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Department of Materials
17:30-17:50 (20min)
› ELASTIC PROPERTIES OF THIN HARD COATINGS BY NANOINDENTATION – SOME PROBLEMS AND SOLUTIONS - Frantisek Lofaj
08:30-09:00 (30min)
› Modelization of the nanostratification of multilayered TiAl/TiAlN coatings - Sylvain GIljean, Laboratoire de Physique et Mécanique Textiles
09:00-09:20 (20min)
› CHARACTERIZATION OF THE NI-W COATING AS A REPLACEMENT FOR CHROME VI - Si yang Lu
09:20-09:40 (20min)
› IN SITU SEM TENSILE TESTING OF GRAPHENE - Ude Hangen, Bruker Nano GmbH
09:40-10:00 (20min)
› MECHANICAL CHARACTERIZATION OF THE INTERFACE IN 3D PRINTED CONCRETE BY CLASSICAL INDENTATION - Maria Taleb, Univ. Lille, Institut Mines-Télécom, Univ. Artois, Junia, ULR 4515 - LGCgE – Laboratoire de Génie Civil et géoEnvironnemen, IMT Lille Douai, Institut Mines-Télécom, Centre for Materials and Processes
10:00-10:20 (20min)
› Simultaneous identification of reliable elastoplastic properties of an alumina thin film and the yield stress of the silicon substrate from an identifiability-based design of experiments using P-h curves - Vincent Fauvel, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174), Thales Research and Technology [Palaiseau]
11:10-11:30 (20min)
Loading... 
Salle 104 - Sciences 1
